HP 14-r200 Maintenance and Service Guide - Page 90
the new enclosure., Reverse this procedure to reassemble and install the display assembly.
View all HP 14-r200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
6. To remove the display/webcam cable, remove the cable from the clips built into the display enclosure (1), and then remove the cable from the display enclosure (2). NOTE: If replacing the display enclosure, be sure that the subcomponents (including the webcam/ microphone module, the antenna receivers, and all associated cables and hardware) are transferred to the new enclosure. Reverse this procedure to reassemble and install the display assembly. 82 Chapter 4 Removal and replacement procedures
6.
To remove the display/webcam cable, remove the cable from the clips built into the display enclosure
(1)
, and then remove the cable from the display enclosure
(2)
.
NOTE:
If replacing the display enclosure, be sure that the subcomponents (including the webcam/
microphone module, the antenna receivers, and all associated cables and hardware) are transferred to
the new enclosure.
Reverse this procedure to reassemble and install the display assembly.
82
Chapter 4
Removal and replacement procedures