HP 15-ac500 Maintenance and Service Guide - Page 50

Hard drive, if installed.

Page 50 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket. Description For use only in HP Notebook models: 2-TB, 5400-rpm, hybrid 8 GB SSD, 9.5 mm 1-TB, 5400-rpm, hybrid 8 GB SSD For use in all models: 1-TB, 5400-rpm, 2.5-in 750 GB, 5400 rpm, 2.5 in 500-GB, 5400-rpm, 7-mm For use only in HP 250/256 G4 Notebook models: 500-GB, 7200-rpm, 7-mm Hard Drive Hardware Kit (includes brackets and connector) For use with all drives except 1 TB drives For use with 1 TB drives Hard drive cable Spare part number 801808-005 731999-005 778192-005 778190-005 778186-005 703267-005 813949-001 829319-001 830311-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 33), if installed. 6. Remove the bottom cover (see Bottom cover on page 39). To remove the hard drive: 1. Disconnect the hard drive cable from the system board (1). 2. Remove the three Phillips PM2.0×2.4 screws (2) that secure the hard drive assembly to the computer. 42 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket.
Description
Spare part number
For use only in HP Notebook models
:
2-TB, 5400-rpm, hybrid 8 GB SSD, 9.5 mm
801808-005
1-TB, 5400-rpm, hybrid 8 GB SSD
731999-005
For use in all models:
1-TB, 5400-rpm, 2.5-in
778192-005
750 GB, 5400 rpm, 2.5 in
778190-005
500-GB, 5400-rpm, 7-mm
778186-005
For use only in HP 250/256 G4 Notebook models:
500-GB, 7200-rpm, 7-mm
703267-005
Hard Drive Hardware Kit
(includes brackets and connector)
For use with all drives except 1 TB drives
813949-001
For use with 1 TB drives
829319-001
Hard drive cable
830311-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
32
).
5.
Remove the optical drive (see
Optical drive
on page
33
), if installed.
6.
Remove the bottom cover (see
Bottom cover
on page
39
).
To remove the hard drive:
1.
Disconnect the hard drive cable from the system board
(1)
.
2.
Remove the three Phillips PM2.0×2.4 screws
(2)
that secure the hard drive assembly to the computer.
42
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts