HP 15-af100 Maintenance and Service Guide - Page 49
Remove the hard drive brackets from the hard drive
View all HP 15-af100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3. Lift the hard drive assembly from the computer (3). 4. To disassemble the hard drive, pull the connector away from the drive to remove it (1). 5. To remove the hard drive brackets, remove the two Phillips PM3.0×3.0 screws (2) that secure each bracket to the hard drive. 6. Remove the hard drive brackets from the hard drive (3). Reverse this procedure to reassemble and install the hard drive. Component replacement procedures 41
3.
Lift the hard drive assembly from the computer
(3)
.
4.
To disassemble the hard drive, pull the connector away from the drive to remove it
(1)
.
5.
To remove the hard drive brackets, remove the two Phillips PM3.0×3.0 screws
(2)
that secure each
bracket to the hard drive.
6.
Remove the hard drive brackets from the hard drive
(3)
.
Reverse this procedure to reassemble and install the hard drive.
Component replacement procedures
41