HP 15-af100 Maintenance and Service Guide - Page 62

TouchPad button board, and the shorter cable from the TouchPad

Get HP 15-af100 PDF manuals and user guides View all HP 15-af100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

TouchPad button board Description TouchPad button board (includes bracket and cables) Spare part number 813954-001 Before removing the TouchPad button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 30). 5. Remove the optical drive (see Optical drive on page 31), if installed. 6. Remove the bottom cover (see Bottom cover on page 37). To remove the TouchPad button board: 1. Disconnect the longer cable from the system board (1) and the shorter cable from the TouchPad (2). 2. Remove the two Phillips PM2.0×2.5 screws (3) that secure the TouchPad button board to the computer. 3. Pull the TouchPad button board toward the bottom of the computer (4), and then remove the TouchPad and cables (5). Reverse this procedure to install the TouchPad button board and cables. 54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
TouchPad button board
Description
Spare part number
TouchPad button board (includes bracket and cables)
813954-001
Before removing the TouchPad button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
30
).
5.
Remove the optical drive (see
Optical drive
on page
31
), if installed.
6.
Remove the bottom cover (see
Bottom cover
on page
37
).
To remove the TouchPad button board:
1.
Disconnect the longer cable from the system board
(1)
and the shorter cable from the TouchPad
(2)
.
2.
Remove the two Phillips PM2.0×2.5 screws
(3)
that secure the TouchPad button board to the computer.
3.
Pull the TouchPad button board toward the bottom of the computer
(4)
, and then remove the TouchPad
and cables
(5)
.
Reverse this procedure to install the TouchPad button board and cables.
54
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts