HP 15-bf000 15-ba199 Models: 15-ba000 - 15-ba099 Models: 15-bf100 - 15-bf199 M - Page 64

Solid-state drive board, Disconnect the cable from the system board

Get HP 15-bf000 PDF manuals and user guides View all HP 15-bf000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Solid-state drive board Description Solid-state drive board (includes cable) Spare part number 850946-001 Before removing the solid-state drive board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the optical drive (see Optical drive on page 39), if installed. 6. Remove the bottom cover (see Bottom cover on page 42). To remove the solid-state drive board: 1. Disconnect the cable from the system board (1). 2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the solid-state drive board and holder to the computer. 3. Lift the board out of the computer (3). 4. Remove the solid-state drive from the holder (see Solid-state drive (SSD) on page 55). Reverse this procedure to install the solid-state drive board and cable. 56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Solid-state drive board
Description
Spare part number
Solid-state drive board (includes cable)
850946-001
Before removing the solid-state drive board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
38
).
5.
Remove the optical drive (see
Optical drive
on page
39
), if installed.
6.
Remove the bottom cover (see
Bottom cover
on page
42
).
To remove the solid-state drive board:
1.
Disconnect the cable from the system board
(1)
.
2.
Remove the three Phillips PM2.0×3.0 screws
(2)
that secure the solid-state drive board and holder to the
computer.
3.
Lift the board out of the computer
(3)
.
4.
Remove the solid-state drive from the holder (see
Solid-state drive (SSD)
on page
55
).
Reverse this procedure to install the solid-state drive board and cable.
56
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts