HP 15-bs000 Maintenance and Service Guide - Page 62
TouchPad click board, To remove the TouchPad click board
View all HP 15-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
TouchPad click board Description TouchPad click board TouchPad click board cable NOTE: This cable connects from the TouchPad click board to the system board. TouchPad cable NOTE: This cable connects from the TouchPad board to the TouchPad click board. Spare part number 926530-001 928882-001 926518-001 Before removing the TouchPad click board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 34). 6. Remove the bottom cover (see Bottom cover on page 41). To remove the TouchPad click board: 1. Disconnect the TouchPad cable from the TouchPad board (1) and the system board cable from the TouchPad click board (2). 2. Remove the three Phillips PM2.0×4.0 screws (3) that secure the TouchPad click board to the computer. 3. Remove the board from the computer (4). Reverse this procedure to install the TouchPad click board. 54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts