HP 15-bs000 Maintenance and Service Guide - Page 88
Power connector, Remove the fan/heat sink see
View all HP 15-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Power connector Description Power connector cable Spare part number 810326-010 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 34). 6. Remove the bottom cover (see Bottom cover on page 41). 7. Remove the fan/heat sink (see Heat sink assembly on page 59). 8. Remove the display (see Display assembly on page 67). To remove the power connector cable: ▲ Pull the tabs away from the connector and remove the power connector from the computer. Reverse this procedure to install the power connector cable. 80 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts