HP 15-bs000 Maintenance and Service Guide - Page 83
Remove the Phillips PM2.0×3.0 screw, To remove the display hinges
View all HP 15-bs000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
c. For installation, note the routing of the display cable through the left hinge cover (3) and display cable through the right hinge cover (4). 7. To remove the display hinges: a. Remove the Phillips PM2.0×3.0 screw (1) from the top of each hinge and three Phillips PM2.5×4.0 screws (2) from the bottom of each hinge. Component replacement procedures 75
c.
For installation, note the routing of the display cable through the left hinge cover
(3)
and display
cable through the right hinge cover
(4)
.
7.
To remove the display hinges:
a.
Remove the Phillips PM2.0×3.0 screw
(1)
from the top of each hinge and three Phillips PM2.5×4.0
screws
(2)
from the bottom of each hinge.
Component replacement procedures
75