HP 15-bw000 Maintenance and Service Guide 1 - Page 66
USB board
View all HP 15-bw000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
USB board Description USB board USB board cable Spare part number 924991-001 924929-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 33), if installed. 6. Remove the bottom cover (see Bottom cover on page 43). 7. Remove the speakers (see Speakers on page 57). To remove the USB board: 1. Disconnect the USB board cable from the USB board (1). 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the USB board to the computer. 3. Remove the USB board (3). Reverse this procedure to install the USB board. 58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts