HP 15-bw000 Maintenance and Service Guide 1 - Page 75
Keyboard cable
View all HP 15-bw000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
1. Position the computer upright, and then disconnect the following cables from the system board: (1): Power connector cable (2): Display cable (3): Power button board cable (4): Speaker cable (5): TouchPad cable (6): Hard drive connector cable (7): USB board cable (8): Keyboard cable (9): Optical drive board cable 2. Remove the six Phillips PM2.0×3.0 screws (1) that secure the system board to the computer. Component replacement procedures 67
1.
Position the computer upright, and then disconnect the following cables from the system board:
(1)
: Power connector cable
(2)
: Display cable
(3)
: Power button board cable
(4)
: Speaker cable
(5)
: TouchPad cable
(6)
: Hard drive connector cable
(7)
: USB board cable
(8)
: Keyboard cable
(9)
: Optical drive board cable
2.
Remove the six Phillips PM2.0×3.0 screws
(1)
that secure the system board to the computer.
Component replacement procedures
67