HP 15-bw000 Maintenance and Service Guide 1 - Page 73
TouchPad button board, and the TouchPad cable from the TouchPad button board
View all HP 15-bw000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
TouchPad button board Description TouchPad button board TouchPad button board cable TouchPad cable Spare part number 924993-001 924934-001 924928-001 Before removing the TouchPad button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 33), if installed. 6. Remove the bottom cover (see Bottom cover on page 43). To remove the TouchPad button board: 1. Disconnect the system board cable (1) and the TouchPad cable from the TouchPad button board (2). 2. Remove the two Phillips PM2.0×3.0 screws (3) that secure the TouchPad button board to the computer. 3. Pull the TouchPad button board toward the bottom of the computer, and then remove the TouchPad button board (4). Reverse this procedure to install the TouchPad button board. Component replacement procedures 65