HP 15-bw000 Maintenance and Service Guide 1 - Page 88
Power button board
View all HP 15-bw000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Power button board Description Power button board Power button board cable Spare part number 924994-001 924933-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 33), if installed. 6. Remove the bottom cover (see Bottom cover on page 43). 7. Remove the display (see Display assembly on page 69). To remove the power button board: 1. Disconnect the cable from the power button board (1). 2. Remove the Phillips PM2.0×2.0 screw (2) that secures the power button board to the computer. 3. Remove the power button board from the computer (3). Reverse this procedure to install the power button board and cable. 80 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts