HP 15-bw000 Maintenance and Service Guide 1 - Page 87
Power connector cable, To remove the power connector cable
View all HP 15-bw000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Power connector cable Description Power connector cable Spare part number 931613-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 33), if installed. 6. Remove the bottom cover (see Bottom cover on page 43). 7. Remove the display (see Display assembly on page 69). To remove the power connector cable: 1. Disconnect the power connector cable from the system board (1). 2. Remove the cable from its routing path in the computer (2). 3. Use a tool to pry the connector out of the computer (3), and then remove the power connector cable (4). Reverse this procedure to install the power connector cable. Component replacement procedures 79