HP 15-f001xx HP 15 Notebook PC Maintenance and Service Guide - Page 39

Memory module, Spread the two retaining tabs

Get HP 15-f001xx PDF manuals and user guides View all HP 15-f001xx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Memory module Description 4 GB memory module (PC3, 12800, 1600-MHz) 2 GB memory module (PC3, 12800, 1600-MHz) Spare part number 691740-001 691739-001 Before removing a memory module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 27). 5. Remove the service door (see Service door on page 28). Remove the memory module: NOTE: Note the location of the memory module. If you are replacing it, install the new memory module in the same slot. 1. Spread the two retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) 2. Remove the memory module (2) by pulling it away from the slot at a 45 degree angle. Reverse this procedure to install the memory module. Component replacement procedures 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Memory module
Description
Spare part number
4 GB memory module (PC3, 12800, 1600-MHz)
691740-001
2 GB memory module (PC3, 12800, 1600-MHz)
691739-001
Before removing a memory module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
27
).
5.
Remove the service door (see
Service door
on page
28
).
Remove the memory module:
NOTE:
Note the location of the memory module. If you are replacing it, install the new memory module in
the same slot.
1.
Spread the two retaining tabs
(1)
on each side of the memory module slot to release
the memory module. (The memory module tilts up.)
2.
Remove the memory module
(2)
by pulling it away from the slot at a 45 degree angle.
Reverse this procedure to install the memory module.
Component replacement procedures
29