HP 15-g029wm HP 15 Notebook PC Compaq 15 Notebook PC Maintenance and Service G - Page 63
Disconnect the USB board cable from the system board
View all HP 15-g029wm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
3. Lift the right side of the system board (1), and then pull the board away from the computer enough to disengage the connectors from the side of the base enclosure (2). NOTE: Be careful not to inadvertently disconnect the speaker cable when lifting the system board. 4. Flip the system board upside down to gain access to the speaker connector (1). 5. Disconnect the USB board cable from the system board (2). Reverse this procedure to install the system board. Component replacement procedures 55
3.
Lift the right side of the system board
(1)
, and then pull the board away from the computer enough to
disengage the connectors from the side of the base enclosure
(2)
.
NOTE:
Be careful not to inadvertently disconnect the speaker cable when lifting the system board.
4.
Flip the system board upside down to gain access to the speaker connector
(1)
.
5.
Disconnect the USB board cable from the system board
(2)
.
Reverse this procedure to install the system board.
Component replacement procedures
55