HP 15-r200 15 Notebook PC 15 TouchSmart Notebook PC 15 Notebook PC 15 TouchSma - Page 77
Disconnect the USB board cable from the system board
View all HP 15-r200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
3. Lift the right side of the system board (1), and then pull the board away from the computer enough to disengage the connectors from the side of the base enclosure (2). NOTE: Be careful not to inadvertently disconnect the speaker cable when lifting the system board. 4. Flip the system board upside down to gain access to the speaker connector (1). 5. Disconnect the USB board cable from the system board (2). Reverse this procedure to install the system board. Component replacement procedures 69
3.
Lift the right side of the system board
(1)
, and then pull the board away from the computer enough to
disengage the connectors from the side of the base enclosure
(2)
.
NOTE:
Be careful not to inadvertently disconnect the speaker cable when lifting the system board.
4.
Flip the system board upside down to gain access to the speaker connector
(1)
.
5.
Disconnect the USB board cable from the system board
(2)
.
Reverse this procedure to install the system board.
Component replacement procedures
69