HP 2x1Ex16 HP IP and Server Console Switches G2 User Guide - Page 17
Performing a cantilever-mount installation, Install up to six cage nuts.
![]() |
View all HP 2x1Ex16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Performing a cantilever-mount installation 1. Remove the six screws, three on each side, from the console switch. 2. Attach the long 1U brackets to the console switch using four of the screws you removed. Discard the two remaining screws. 3. Install up to six cage nuts. 4. Secure the console switch to the rails using the appropriate number of M-6 screws. Performing a side-mount installation 1. Remove the six screws, three on each side, from the console switch. Installing the console switch 17
![](/manual_guide/products/hewlettpackard-0x2x16-hp-ip-server-console-switches-g2-user-guide-22364cf/17.png)
Installing the console switch
17
Performing a cantilever-mount installation
1.
Remove the six screws, three on each side, from the console switch.
2.
Attach the long 1U brackets to the console switch using four of the screws you removed. Discard the two
remaining screws.
3.
Install up to six cage nuts.
4.
Secure the console switch to the rails using the appropriate number of M-6 screws.
Performing a side-mount installation
1.
Remove the six screws, three on each side, from the console switch.