HP 3180 User Guide - Page 65
Clean the exterior, Troubleshooting tips and resources, Solve printing problems - cartridge error
UPC - 883585707454
View all HP 3180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the strip thoroughly with a damp cloth to remove any residual alcohol. CAUTION: Be careful not to spill alcohol on the glass or exterior of the HP Fax, as this might damage the HP Fax. 5. Close the automatic document feeder cover. 6. Plug in the power cord. Clean the exterior NOTE: Before cleaning the HP Fax, unplug the power cord from the electrical socket. Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the case. The exterior of the HP Fax does not require cleaning. Keep fluids away from the interior of the HP Fax, as well as from the control panel. Troubleshooting tips and resources Use the following tips and resources to resolve printing problems. • For a paper jam, see Clear paper jams. • For paper-feed problems, such as the paper skew and paper pick, see Solve paper- feed problems. • When the HP Fax is plugged in for the first time, it takes approximately 1 - 2 minutes to initialize it after the print cartridges are installed. • Make sure the power cord and other cables are working, and are firmly connected to the HP Fax. Make sure the HP Fax is connected firmly to a functioning alternating current (AC) power outlet. For voltage requirements, see Electrical specifications. • Make sure media is loaded correctly in the input tray and is not jammed in the HP Fax. • Make sure all packing tapes and materials are removed. Solve printing problems Problem Possible solution The HP Fax shuts down unexpectedly Check the power and power connections Error message appears on control-panel display A non-recoverable error has occurred Blank or partial Clean the print page printed cartridge More information Make sure the HP Fax is connected firmly to a functioning alternating current (AC) power outlet. For voltage requirements, see Electrical specifications. Unplug the power cord, wait about 20 seconds, and plug the power cord back in. If the problem persists, visit the HP Web site (www.hp.com/support) for the latest troubleshooting information, or product fixes and updates. Complete the print cartridge cleaning procedure. For more information, see Work with print cartridges. Solve printing problems 61