HP 3380 Service Manual - Page 18

Product configuration Hardware description The product provides the following features: ● Prints at 1200 dots-per-inch (dpi). ● The flatbed scanner scans at 600 pixels-per-inch (ppi) with 24-bits per pixel (bpp) and has an automatic document feeder (ADF) that holds up to 50 pages. ● The formatter and the line interface unit (LIU) provide Group-3-compatible faxing capabilities. ● The product prints 20 pages per minute (ppm) on letter-size paper or 19 ppm on A4. ● The main input tray has a 250-sheet capacity for continuous, multiple-page printing. ● The priority input tray accommodates manual feeding of up to ten sheets. ● Both trays are center-justified for all supported paper sizes. ● The output bin holds up to 125 sheets. ● The product has a very fast first-page-out, at less than eight seconds. ● When the fuser has reached operational temperature, the first-copy-out speed is 12 seconds when using the flatbed scanner and less than 18 seconds when using the ADF. ● The formatter board contains 4 MB of ROM and 32 MB of RAM, and an embedded 32-bit Coldfire V4e processor. ● One DIMM slot is available for font or memory expansion (supporting an 8 MB, 16 MB, 32 MB, or 64 MB DIMM). ● The print engine has a 1,000 average (10,000 peak) page-per-month duty cycle. ● With 5 percent toner coverage, the standard print-cartridge life is 2,500 pages and the high-capacity print-cartridge life is 3,500 pages. Firmware description The firmware in the product includes: ● PCL 5e, PCL 6, and PostScript® (PS) Level 2 emulation ● 45 PCL and 35 PS fonts ● Memory Enhancement technology (MEt) with hardware compression and decompression ● Resolution Enhancement technology (REt) and EconoMode functionality Software and supported operating systems The following software components are included with the product: ● HP Toolbox ● HP LaserJet Scan ● TWAIN or WIA Scan Driver ● HP LaserJet Fax ● Readiris OCR (not installed with other software; separate installation is required) 2 Chapter 1 Product information ENWW