HP 4300n HP LaserJet 4200 and 4300 series printer - User Guide - Page 118
Use Device Storage Manager in HP Web Jetadmin to disable the write protection. See
UPC - 808736314381
View all HP 4300n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Message Explanation or recommended action ENV FEEDER LOAD [SIZE] A job has been sent to the optional envelope feeder and the feeder is not loaded with the correct envelope size. 1. Load the correct size in the feeder. 2. Make sure that the envelope size is set correctly on the Paper Handling menu at the printer control panel. (See "Paper Handling menu" on page 154.) 3. Pressing PAUSE/RESUME will prompt a question asking if you would rather print on another available size of envelope in the printer. Use UP ARROW ( ) or DOWN ARROW ( ) to scroll through the available sizes, and then press SELECT ( ) to select one. FLASH DEVICE FAILURE For help press The flash DIMM had a critical failure and no longer can be used. Remove the flash DIMM and replace it with a new one. (See "To install memory" on page 170.) FLASH FILE OPERATION FAILED For help press The requested operation could not be performed. You might have attempted an illegal operation, such as trying to download a file to a non existent folder. FLASH FILE SYSTEM IS FULL For help press The flash DIMM is full. Delete files from the flash DIMM. Use Device Storage Manager in HP Web Jetadmin to download or delete files and fonts. (See the HP Web Jetadmin software Help for more information.) FLASH IS WRITE PROTECTED For help press The flash DIMM is protected, and no new files can be written to it. Use Device Storage Manager in HP Web Jetadmin to disable the write protection. (See the HP Web Jetadmin software Help for more information.) INSERT OR CLOSE TRAY [XX] The specified tray is open or missing. For help press Insert or close the tray for printing to continue. INSTALL CARTRIDGE For help press The print cartridge has been removed and must be reinstalled for printing to continue. Make sure that the print cartridge is fully inserted. INSTALL FUSER For help press The fuser is not fully seated or has been removed and must be reinstalled for printing to continue. 1. If the fuser is in the printer, remove and reinstall it. If the fuser is not in the printer, install it. 2. Push the fuser firmly into the printer until the blue levers on both sides click into place. WARNING! The fuser is very hot. To avoid minor burns, wait 30 minutes for the fuser to cool before removing it from the printer. 116 4 Problem solving ENWW