HP 4300n HP LaserJet 4200 and 4300 series printer - User Guide - Page 137
Does the printer select the proper trays and paper-handling accessories?, READY, USE REQUESTED TRAY
UPC - 808736314381
View all HP 4300n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
5 Does the printer select the proper trays and paper-handling accessories? YES For other problems, check the Contents, the Index, or the printer driver online Help. NO The printer pulls paper from the wrong tray. An optional accessory is not working properly. A message other than READY appears on the printer control panel display. Make sure that you have selected the Print a configuration page to verify that the Go to "Understanding correct tray. (See "Selecting which tray is accessory is installed properly and is printer messages" on used for printing" on page 46.) functional. (See "Configuration page" on page 109. Make sure that trays are correctly page 83.) configured for paper size and type. (See Configure the printer driver to recognize "Loading tray 2 or an optional 500-sheet the installed accessories (including trays). tray" on page 43.) Print a configuration page (See the printer driver online Help.) to see current tray settings. (See "Configuration page" on page 83.) Turn the printer power off, and then turn the printer power on. Make sure that the tray selection (Source) Verify that you are using the correct or Type in the printer driver or program is optional accessory for the printer. set correctly. (The printer driver and If the optional duplexer will not duplex, program settings override the printer control check that the rear output bin is closed. panel settings.) By default, paper loaded in tray 1 will be If the optional duplexer will not duplex, you might need to install more memory. (See printed first. If you do not want to print from "Printer memory and expansion" on tray 1, remove any paper loaded in the tray page 169.) or change the USE REQUESTED TRAY setting. (See "Customizing tray 1 operation" on page 47.) Change TRAY 1 SIZE and TRAY 1 TYPE to a setting other than ANY. If the optional stacker or stapler/stacker is not working properly, check the accessory lights. (See "Accessory lights" on page 122.) If you want to print from tray 1, but cannot select the tray in a program, see "Customizing tray 1 operation" on page 47. If the optional stacker or stapler/stacker is not working properly, check to see if a message appears on the printer control panel display. (See "Control panel messages" on page 110.) If the optional stapler/stacker is not stapling, but the accessory light is solid green, and neither TOO MANY PAGES IN JOB nor DIFFERENT PAPER SIZES IN JOB appears on the printer control panel display, call for support. (See "Getting support" on page 144.) ENWW Determining printer problems 135