HP 4300n HP LaserJet 4200 and 4300 series printer - User Guide - Page 94
Replacing the stapler unit, Removing and replacing the stapler unit
UPC - 808736314381
View all HP 4300n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Replacing the stapler unit 1 Removing and replacing the stapler unit Use these steps to replace a defective stapler unit in the optional stapler/stacker. To remove and replace the stapler unit 1 Locate the stapler unit on the right side of the stapler/stacker. 2 Rotate the stapler unit toward the front of the printer until the unit 2 clicks. Hold the stapler unit in this open position. 3 Push down on the tab at the top of the stapler unit. 4 Hold the tab down and pull the stapler unit up and out of the stapler/ stacker. 5 Disconnect cable that connects the stapler unit to the stapler/ stacker. (Only the blue part detaches.) Release the white tab that contains the blue cable connector by opening the tab to the left. 3 4 5 92 3 Managing and maintaining the printer ENWW