HP 4415s Drives - Windows 7 - Page 29
and loosen the captive screw, Remove the 2 hard drive screws
UPC - 884962601167
View all HP 4415s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
16. Slide the top cover back until it disengages from the base enclosure, and then rest the top cover on the computer so that the TouchPad cable is accessible. 17. Release the ZIF connector (1) to which the TouchPad cable is connected, and then disconnect the TouchPad cable from the system board (2) by pulling upward. 18. Remove the top cover (3) from the computer to expose the hard drive and WLAN compartment. 19. Remove the 2 hard drive screws (1) and loosen the captive screw (2) that secure the hard drive. 20. Use the Mylar tab (3) on the hard drive to slide the hard drive to the right to disconnect it from the system board. 25
16.
Slide the top cover back until it disengages from the base enclosure, and then rest the top cover
on the computer so that the TouchPad cable is accessible.
17.
Release the ZIF connector
(1)
to which the TouchPad cable is connected, and then disconnect the
TouchPad cable from the system board
(2)
by pulling upward.
18.
Remove the top cover
(3)
from the computer to expose the hard drive and WLAN compartment.
19.
Remove the 2 hard drive screws
(1)
and loosen the captive screw
(2)
that secure the hard drive.
20.
Use the Mylar tab
(3)
on the hard drive to slide the hard drive to the right to disconnect it from the
system board.
25