HP 450c HP DesignJet 430, 450C, and 455CA Printer - User's Guide - Page 29
Cartridge Alignment Routine see
View all HP 450c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
SETUP 1 Setting up your printer Task 5: Load the print cartridge(s) 4 When all the cartridges are installed, lower the cover. On the front panel, the Ready light should flash for up to about a minute and then go off. The Load Media light should then be on (together with Media Type and Print Quality lights). READY LOAD MEDIA Print Quality lights Media Type lights 5 If you wish, you can now check your cartridge alignment by running the Black Cartridge Alignment Routine (see page 5-4). However, this is normally only required for troubleshooting. 1-13
1–13
4
When all the cartridges are installed, lower the cover.
On the front panel, the
Ready
light should flash for up to about a minute and then go off.
The
Load
Media
light should then be on (together with
Media Type
and
Print Quality
lights).
5
If you wish, you can now check your cartridge alignment by running the Black
Cartridge Alignment Routine (see page 5–4).
However, this is normally only
required for troubleshooting.
SETUP
1
Setting up your printer
Task 5: Load the print cartridge(s)
READY
LOAD MEDIA
Print Quality
lights
lights
Media Type