HP 4700dn HP Color LaserJet 4700 - User Guide - Page 80
Changing printer control panel configuration settings, Job storage limit
UPC - 884420110972
View all HP 4700dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Changing printer control panel configuration settings By using the printer control panel, you can make changes to general printer configuration default settings such as tray size and type, sleep mode, printer personality (language), and jam recovery. The printer control panel can also be accessed from a computer by using the Settings page of the embedded Web server. The computer shows the same information that the control panel shows. For more information, see Using the embedded Web server. CAUTION Configuration settings seldom need to be changed. Hewlett-Packard recommends that only the system administrator change configuration settings. Job storage limit This option sets the limit for the maximum number of jobs stored on the hard disk at the printer. The maximum number allowed is 100, and the default value is 32. Setting the job storage limit 1. Press Menu to enter the MENUS. 2. Press to highlight CONFIGURE DEVICE. 3. Press to select CONFIGURE DEVICE. 4. Press to highlight SYSTEM SETUP. 5. Press to select SYSTEM SETUP. 6. Press to highlight JOB STORAGE LIMIT. 7. Press to select JOB STORAGE LIMIT. 8. Press or to change the value. 9. Press to set the value. 10. Press Menu. Job held timeout This option sets the period of time that the system keeps files in job storage before deleting them from the queue. The default setting for this option is OFF; the other available settings are 1 HOUR, 4 HOURS, 1 DAY, and 1 WEEK. Setting the job held timeout 1. Press Menu to enter the MENUS. 2. Press to highlight CONFIGURE DEVICE. 3. Press to select CONFIGURE DEVICE. 4. Press to highlight SYSTEM SETUP. 5. Press to select SYSTEM SETUP. 6. Press to highlight JOB HELD TIMEOUT. 64 Chapter 2 Control panel ENWW