HP 5500ps HP Designjet 5500 series printers - Quick Reference Pocket Guide - Page 87
after replacing a printhead and, printhead cleaner
View all HP 5500ps manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
pocket.book Page 85 Friday, June 28, 2002 4:31 PM 85 - maintain the ink system after replacing a printhead and printhead cleaner Whenever a printhead is replaced, the printer will normally perform a printhead alignment. If you wish, you can turn off this automatic alignment from the front panel: select Internal RIP Settings > Align Calibration > Off. The printhead alignment procedure requires an A1 or D-size paper size. When the front panel displays Ready, you are ready to print. NOTE: Make sure the printer window and the right-hand door are closed after you replace the supplies. The printer will not print while these are open. after replacing a printhead and printhead cleaner MAINTAIN THE INK SYSTEM
MAINTAIN THE INK SYSTEM
85 - maintain the ink system
after replacing a printhead and printhead cleaner
after replacing a printhead and
printhead cleaner
Whenever a printhead is replaced, the printer will normally
perform a printhead alignment. If you wish, you can turn off this
automatic alignment from the front panel: select Internal RIP
Settings > Align Calibration > Off.
The printhead alignment procedure requires an A1 or D-size
paper size.
When the front panel displays Ready, you are ready to print.
NOTE:
Make sure the printer window and the right-hand door
are closed after you replace the supplies. The printer will not print
while these are open.
pocket.book
Page 85
Friday, June 28, 2002
4:31 PM