HP 6125XLG R2306-HP 6125XLG Blade Switch MCE Command Reference
HP 6125XLG Manual
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6125XLG manual content summary:
- HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 1
HP 6125XLG Blade Switch MCE Command Reference Part number: 5998-3736 Software version: Release 2306 Document version: 6W100-20130912 - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 2
, or use of this material. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 3
-capability simple 15 vpn-target 15 IPv6 MCE configuration commands 17 display bgp group ipv6 vpn-instance 17 display bgp peer ipv6 vpn-instance 19 ipv6-family 21 Support and other resources 23 Contacting HP 23 Subscription service 23 Related information 23 Documents 23 Websites 23 - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 4
MCE configuration commands description Use description to configure a description for a VPN instance. Use undo description to delete the description. Syntax description text undo description Default No description for a VPN instance is configured. Views VPN instance view Predefined user roles - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 5
advertisements: 30 seconds Peer preferred value: 0 Routing policy configured: No routing policy is configured Members: Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State 10.1.1.1 10 Table 1 Command output Field BGP peer-group remote AS number 0 0 0 0 00:01:02 Connect Description Name of - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 6
number of routes that the VPN instance supports. Threshold value. If the threshold is reached, the device generates prompt information. Number of messages received. Number of messages sent. Number Any view Predefined user roles network-admin network is specified, this command displays all peers. - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 7
29 0 Table 2 Command output PrefRcv Up/Down State 1 00:18:47 Established Field BGP Local router ID local AS number Total number of peers Peers in established : Total 0 messages, Update messages 0 Sent: Total 0 messages, Update messages 0 Maximum allowed prefix number: 12345 Threshold: 23% - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 8
[ instance-name vpn-instance-name ] Views Any view Predefined user roles network-admin network-operator Parameters instance-name vpn-instance-name: Total VPN-Instances configured : 1 VPN-Instance Name RD abc 1:1 Create time 2011/05/18 10:48:17 Table 3 Command output Field VPN- - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 9
Command output number of routes supported reaches this value, the device generates a prompt. If no threshold is configured, this field is not displayed. domain-id Use domain-id to configure an OSPF domain ID. Use undo domain-id to restore the default notation:16-bit user-defined number in the range - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 10
the undo domain-id command deletes all domain IDs. Examples # Configure the OSPF domain ID Such a routing policy is referred to as an export routing -policy undo export route-policy Default No routing policy is applied view, IPv6 VPN view Predefined user roles network-admin Parameters route-policy - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 11
ext-community-type to configure the type code of an OSPF extended community attribute. Use undo ext-community-type to restore the default. Syntax ext-community Type are 0x0005, 0x0107, and 0x0306. Views OSPF view Predefined user roles network-admin Parameters domain-id type-code1: Specifies the type - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 12
. Such a routing policy is referred to as an import routing policy -policy undo import route-policy Default No import routing policy is VPN view, IPv6 VPN view Predefined user roles network-admin Parameters route-policy execute this command multiple times, the most recent configuration takes effect. - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 13
(Layer 3-IP Routing Command Reference) ip binding vpn-instance Use ip binding vpn-instance to associate an interface with a VPN instance. Use undo ip binding vpn-instance to remove the association. Syntax ip binding vpn-instance vpn-instance-name undo ip binding vpn-instance Default No VPN instance - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 14
undo ip vpn-instance vpn-instance-name Default No VPN instance is created. Views System view Predefined user roles network-admin Parameters vpn-instance-name Related command route-distinguisher ipv4-family Use ipv4-family to enter IPv4 VPN view. Use undo ipv4-family to remove all the configurations - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 15
Default No RD is specified for a VPN instance. Views VPN instance view Predefined user roles network-admin Parameters route-distinguisher: Specifies the RD for the VPN instance, a string of 3 to 21 characters in one of the following formats: • 16-bit AS number:32-bit user-defined number - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 16
in decimal. If the BGP AS number is greater than 65535, the default route tag is 0. Views OSPF view Predefined user roles network-admin Parameters tag-value: Specifies the VPN route tag in the range of 0 to 4294967295. Usage guidelines On an MCE device, you can configure a VPN route tag for a VPN - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 17
maximum route number is reached, the system still accepts routes but generates a syslog message. Description This command prevents the MCE from learning excessive routes. If you execute this command multiple times, the most recent configuration takes effect. The setting configured in VPN instance - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 18
. Syntax vpn-instance-capability simple undo vpn-instance-capability Default Routing loop detection is enabled for a VPN OSPF process. Views VPN OSPF process view Predefined user roles network-admin Examples # Disable routing loop detection for the OSPF process 100 in the VPN vpna. system - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 19
targets. If a match is found, the peer adds the received routes to the VPN routing table. You can configure multiple route targets for a VPN instance by executing this command multiple times. The route targets configured in VPN instance view apply to both the IPv4 VPN and IPv6 VPN. The route targets - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 20
configuration commands." user roles network-admin network-operator Parameters group-name: Specifies a BGP IPv6 peer group by its name, a case-sensitive string of 1 to 47 characters. If no group is specified, this command BGP peer group: grp1 Remote AS number: Not specified Type: external Members: - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 21
AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State 3::3 10 0 0 0 0 00:01:02 Connect Table 5 Command output Field BGP peer group Remote AS number Type Maximum allowed prefix number Threshold Configured hold time value Keepalive timer value Minimum time between advertisements Peer preferred value - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 22
{ log-info | verbose } | verbose ] Views Any view Predefined user roles network-admin network-operator Parameters vpn-instance vpn-instance-name: Specifies the AS number: 100 Total number of peers: 1 Peers in established state: 1 Peer 3::3 AS MsgRcvd MsgSent 200 24 29 Table 6 Command output - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 23
messages, Update messages 0 Maximum allowed prefix number: 12345 Threshold: 23% Minimum time between advertisements is 30 seconds Optional capabilities: Multi-protocol extended capability has been enabled Route refresh capability has been enabled Peer preferred value: 0 Table 7 Command output Field - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 24
Optional capabilities supported by the Table 8 Command output Field Peer Refers to the error subcode of the Notification, which identifies specific information about the reported error. ipv6-family Use ipv6-family to create and enter IPv6 VPN view. Use undo ipv6-family to remove all configurations - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 25
Predefined user roles network-admin Usage guidelines In IPv6 VPN view, you can configure IPv6 VPN parameters, such as the export routing policy and import routing policy. Examples # In VPN instance view, enter IPv6 VPN view. system-view [ - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 26
Acronyms. Websites • HP.com http://www.hp.com • HP Networking http://www.hp.com/go/networking • HP manuals http://www.hp.com/support/manuals • HP download drivers and software http://www.hp.com/support/downloads • HP software depot http://www.software.hp.com • HP Education http://www.hp.com/learn 23 - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 27
Command conventions Convention Boldface Italic [ ] { x | y | ... } [ x | y | ... ] { x | y | ... } * [ x | y | ... ] * & # Description Bold text represents commands bold text. For example, the New User window appears; click OK. Multi-level or damage to hardware or software. An alert that calls - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 28
wired-WLAN switch. Represents an access point. Represents a security product, such as a firewall, a UTM, or a load-balancing or security card that is installed in a device. Represents a security card, such as a firewall card, a load-balancing card, or a NetStream card. Port numbering in examples - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 29
binding vpn-instance,10 ip vpn-instance,11 ipv4-family,11 ipv6-family,21 R route-distinguisher,12 route-tag,13 routing-table limit,14 S Subscription service,23 V vpn-instance-capability simple,15 vpn-target,15 W Websites,23 26
HP 6125XLG Blade Switch
MCE
Command Reference
Part number: 5998-3736
Software version: Release 2306
Document version: 6W100-20130912