HP 6125XLG R2306-HP 6125XLG Blade Switch MCE Command Reference - Page 9
domain-id, Table 4, Command output
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Ipv6-family: Export VPN Targets : 2:2 Import VPN Targets : 2:2 Maximum Routes Limit : 2000 Threshold Value(%): 50 Table 4 Command output Field Interfaces Ipv4-family Ipv6-family Export VPN Targets Import VPN Targets Threshold Value(%) Description Interface to which the VPN instance is bound. IPv4 VPN information. IPv6 VPN information. Export route target attribute of the VPN. Import route target attribute of the VPN. Threshold for warning. When the percentage of the number of the received route prefixes to the maximum number of routes supported reaches this value, the device generates a prompt. If no threshold is configured, this field is not displayed. domain-id Use domain-id to configure an OSPF domain ID. Use undo domain-id to restore the default. Syntax domain-id domain-id [ secondary ] undo domain-id [ domain-id ] Default The OSPF domain ID is 0. Views OSPF view Predefined user roles network-admin Parameters domain-id: Specifies an OSPF domain ID in one of the following formats: • Integer, in the range of 0 to 4294967295. For example, 1. • Dotted decimal notation. For example, 0.0.0.1. • Dotted decimal notation:16-bit user-defined number in the range of 0 to 65535. For example, 0.0.0.1:512. secondary: Specifies the domain ID as secondary. Without this keyword, the domain ID is primary. 6