HP 6125XLG R2306-HP 6125XLG Blade Switch TRILL Configuration Guide - Page 15

• GR Helper-A neighbor of the GR Restarter. It helps the GR Restarter to complete the GR process. To configure TRILL GR: Step Command 1. Enter system view. system-view 2. Enter TRILL view. trill 3. Enable GR for TRILL. graceful-restart 4. (Optional.) Configure graceful-restart interval the GR interval for TRILL. interval Remarks N/A N/A By default, GR is disabled for TRILL. The default setting is 300 seconds. Displaying and maintaining TRILL Execute the display commands in any view and the reset command in user view. Task Command Display TRILL ardency table information. display trill adjacent-table [ count | nickname nickname interface interface-type interface-number ] Display brief TRILL information. display trill brief Display TRILL FIB information. display trill fib [ count | nickname nickname ] Display TRILL GR status. display trill graceful-restart status Display TRILL port information. display trill interface [ interface-type interface-number ] Display TRILL LSDB information. display trill lsdb [ local | lsp-id lsp-id | verbose ] * Display all ingress entries in the TRILL multicast FIB (MFIB). display trill mfib ingress [ vlan vlan-id [ local-entry | remote-entry ] ] Display all egress entries in the TRILL display trill mfib transit [ nickname nickname [ prune-entry | rpf-entry MFIB. | vlan vlan-id [ mac-address mac-address ] ] ] Display information about the TRILL multicast routing table. display trill multicast-route [ tree-root nickname [ vlan vlan-list [ mac-address mac-address ] ] ] Display the TRILL neighbor table. display trill neighbor-table Display the TRILL neighbor statistics. display trill peer [ interface interface-type interface-number ] Display the TRILL RPF check table information. display trill rpf-table tree-root nickname Display information about the TRILL unicast routing table. display trill unicast-route [ verbose ] Clear dynamic running statistics of the TRILL process. reset trill 12