HP 7 Plus 1302us HP 7 Plus Tablet and HP 7.1 Tablet Maintenance and Service Gu - Page 24
Speaker
View all HP 7 Plus 1302us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Remove the antenna: 1. Unsolder the antenna cable from the system board wireless terminal (1). 2. Release the antenna cable from the routing channel (2) between the battery and the system board. 3. Detach the antenna transceiver (3) from the display panel assembly. (The antenna transceiver is attached to the display panel assembly with double-sided adhesive.) 4. Remove the antenna transceiver and cable. Reverse this procedure to install the antenna. Speaker Description Speaker (includes speaker and cables) Spare part number 775004-001 Before removing the speaker, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 14). 5. Disconnect the battery cables from the system board (see Battery on page 16). 18 Chapter 5 Removal and replacement procedures