HP 7 Plus 1302us HP 7 Plus Tablet and HP 7.1 Tablet Maintenance and Service Gu - Page 29

System board

Get HP 7 Plus 1302us PDF manuals and user guides View all HP 7 Plus 1302us manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

2. Detach the power/volume button board (2) from the display panel assembly. (The power/volume button board is attached to the display panel assembly with double-sided adhesive. 3. Remove the power/volume button board and cable. Reverse this procedure to install the power/volume button board. System board Description System board equipped with an AllWinner A31S 1.00-GHz quad core processor, 1.0-GB LPDDR2 system memory and an 8.0-GB Nand flash drive Spare part number 775001-001 Before removing the system board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 14). 5. Disconnect the battery cable from the system board (see Battery on page 16). System board 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
2.
Detach the power/volume button board
(2)
from the display panel assembly. (The power/volume
button board is attached to the display panel assembly with double-sided adhesive.
3.
Remove the power/volume button board and cable.
Reverse this procedure to install the power/volume button board.
System board
Description
Spare part number
System board equipped with an AllWinner A31S 1.00-GHz quad core processor, 1.0-GB LP-
DDR2 system memory and an 8.0-GB Nand flash drive
775001-001
Before removing the system board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
14
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
16
).
System board
23