HP 7 Plus 1302us HP 7 Plus Tablet and HP 7.1 Tablet Maintenance and Service Gu - Page 25

Rear-facing webcam

Page 25 highlights

Remove the speaker: 1. Unsolder the speaker cables (1) from the system board terminals. NOTE: When installing the speaker, the speaker red cable should be soldered to the system board "+" terminal, and the speaker black cable should be soldered to the "-" terminal. 2. Release the speaker cable (2) from the retention clip built into the display panel assembly. 3. Detach the speaker (3) from the display panel assembly. (The speaker is attached to the display panel assembly with double-sided adhesive.) 4. Remove the speaker. Reverse this procedure to install the speaker. Rear-facing webcam Description 2.0-MP rear-facing webcam (includes cable) Spare part number 753193-001 Before removing the rear-facing webcam, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. Rear-facing webcam 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

Remove the speaker:
1.
Unsolder the speaker cables
(1)
from the system board terminals.
NOTE:
When installing the speaker, the speaker red cable should be soldered to the system
board “+” terminal, and the speaker black cable should be soldered to the “-” terminal.
2.
Release the speaker cable
(2)
from the retention clip built into the display panel assembly.
3.
Detach the speaker
(3)
from the display panel assembly. (The speaker is attached to the
display panel assembly with double-sided adhesive.)
4.
Remove the speaker.
Reverse this procedure to install the speaker.
Rear-facing webcam
Description
Spare part number
2.0-MP rear-facing webcam (includes cable)
753193-001
Before removing the rear-facing webcam, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
Rear-facing webcam
19