HP 7 Plus 1302us HP 7 Plus Tablet and HP 7.1 Tablet Maintenance and Service Gu - Page 28
Power/volume button board
View all HP 7 Plus 1302us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Remove the front-facing webcam: 1. Release the ZIF connector (1) to which the front-facing webcam cable is attached, and then disconnect the front-facing webcam cable from the system board. 2. Release the front-facing webcam (2) from the retention molding built into the display panel assembly. 3. Remove the front-facing webcam and cable. Reverse this procedure to install the front-facing webcam. Power/volume button board Description Power/volume button board (includes cable) Spare part number 774999-001 Before removing the power/volume button board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 14). 5. Disconnect the battery cables from the system board (see Battery on page 16). Remove the power/volume button board: 1. Release the ZIF connector (1) to which the power/volume button board cable is attached, and then disconnect the power/volume button board cable from the system board. 22 Chapter 5 Removal and replacement procedures