HP 7 Plus 1302us HP 7 Plus Tablet and HP 7.1 Tablet Maintenance and Service Gu - Page 26

Microphone

Page 26 highlights

4. Remove the back cover (see Back cover on page 14). 5. Disconnect the battery cables from the system board (see Battery on page 16). Remove the rear-facing webcam: 1. Turn the system board upside down. 2. Release the zero insertion force (ZIF) connector (1) to which the rear-facing webcam is attached, and then disconnect the rear-facing webcam from the system board. 3. Remove the rear-facing webcam (2) and cable. Reverse this procedure to install the rear-facing webcam. Microphone Description Microphone (includes cable) Spare part number 773135-001 Before removing the microphone, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 14). 5. Disconnect the battery cables from the system board (see Battery on page 16). 20 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

4.
Remove the back cover (see
Back cover
on page
14
).
5.
Disconnect the battery cables from the system board (see
Battery
on page
16
).
Remove the rear-facing webcam:
1.
Turn the system board upside down.
2.
Release the zero insertion force (ZIF) connector
(1)
to which the rear-facing webcam is attached,
and then disconnect the rear-facing webcam from the system board.
3.
Remove the rear-facing webcam
(2)
and cable.
Reverse this procedure to install the rear-facing webcam.
Microphone
Description
Spare part number
Microphone (includes cable)
773135-001
Before removing the microphone, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
14
).
5.
Disconnect the battery cables from the system board (see
Battery
on page
16
).
20
Chapter 5
Removal and replacement procedures