HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 146
firmware install, An account name and password on the remote host FTP only
![]() |
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
firmware install Description Downloads firmware from a remote host to the switch, installs the firmware, then resets the switch to activate the firmware. This is disruptive. The command prompts you for the following: • The file transfer protocol (FTP or TFTP) • IP address or DNS host name of the remote host • An account name and password on the remote host (FTP only) • Pathname for the firmware image file Authority Admin session Syntax firmware install Examples The following is an example of the firmware install command using FTP: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> firmware install The switch will be reset. This process will cause a disruption to I/O traffic. Continuing with this action will terminate all management sessions, including any Telnet sessions. When the firmware activation is complete, you may log in to the switch again. Do you want to continue? [y/n]: y Press 'q' and the ENTER key to abort this command. FTP or TFTP : ftp User Account : johndoe IP Address : 10.0.0.254 Source Filename : 8.0.4.xx.xx_epc About to install image. Do you want to continue? [y/n] y Connected to 10.0.0.254 (10.0.0.254). 220 localhost.localdomain FTP server (Version wu-2.6.1-18) ready. 331 Password required for johndoe. Password: xxxxxxxxx 230 User johndoe logged in. bin 200 Type set to I. verbose Verbose mode off. This may take several seconds... The switch will now reset. Connection closed by foreign host. 146 Command Reference
![](/manual_guide/products/hewlettpackard-820q-hp-storageworks-820q-fibre-channel-switch-command-line-interface-guide-56970418-2010-37c73bd/146.png)