HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 228
set switch state, Table 58 Switch administrative state parameters, Description, Authority, Syntax
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
set switch state Description Changes the administrative state for all ports on the switch. The previous set config switch command settings are restored after a switch reset or a reactivation of a switch configuration. Authority Admin session Syntax set switch state [state] Operands [state] Table 58 describes the switch administrative state parameters. Table 58 Switch administrative state parameters Parameter online offline diagnostics Description Activates and prepares the ports to send data. This is the default. Prevents the ports from receiving signal and accepting a device login. Prepares the ports for testing and prevents each port from accepting a device login. When you leave the diagnostics state, the switch automatically resets. Notes QuickTools and Enterprise Fabric Management Suite will override any temporary administrative state changes that have been made using the Set Port State command. Therefore, to avoid unexpected results, do not manage port administrative states with QuickTools or Enterprise Fabric Management Suite and the CLI at the same time. Examples The following is an example of the set switch command: 8/20q FC Switch #>admin start 8/20q FC Switch (admin) #>set switch state offline See also show switch, page 272 228 Command Reference