HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 30
Renaming a user-defined policy, Copying a policy, Managing the security association database
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Renaming a user-defined policy To rename a policy (policy_1), enter the ipsec policy rename command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> ipsec edit 8/20q FC Switch (admin-ipsec) #> ipsec policy rename policy_1 policy_4 The security policy will be renamed. Please confirm (y/n): [n] y 8/20q FC Switch (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated. Please confirm (y/n): [n] y Copying a policy You can copy both user-defined and dynamic policies. To copy a policy (policy_1), enter the ipsec policy copy command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> ipsec edit 8/20q FC Switch (admin-ipsec) #> ipsec policy copy policy_1 policy_a 8/20q FC Switch (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated. Please confirm (y/n): [n] y Managing the security association database The security association database is made up of user-defined associations and dynamic associations (associations created by the switch). You can delete, modify, rename, and copy user-defined associations. Dynamic associations can only be copied. 30 Network Configuration