HP 8/24 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Apri - Page 125
configShow, Specifies a text string, enclosed in double quotation marks, that limits
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
configShow 2 configShow Synopsis Displays system configuration settings. configshow -pattern "pattern" configshow [-all | -fid FID| -chassis] [-local|-USB|-U] [file] [-pattern "pattern"] Description Use this command to display system configuration settings. Some but not all of these parameters are set by the configure and configureChassis commands. Beginning with Fabric OS v6.2.0, configuration data is grouped into chassis information and switch information. Each configuration type is managed separately. For information on file format and specific parameters contained in each section, refer to the configUpload help page. The behavior of configShow depends on the environment in which the command is executed. • In a Virtual Fabric environment, when executed without operands, this command displays the switch configuration for the current logical switch. An Admin with chassis permissions can use additional parameters to display configuration data for a specified logical switch (-fid FID), for the chassis (-chassis), or for all logical switches and the chassis (-all). • In a non-Virtual Fabric environment, when executed without operands, this command displays the switch configuration. When executed with the -all operand, configShow displays all of the system's configuration data, including chassis and switch configuration data. The -chassis option displays the chassis configuration only. The -fid option is not valid. Notes Not all values displayed are applicable to all system models and configurations. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands The following operands are optional: -pattern "pattern" Specifies a text string, enclosed in double quotation marks, that limits the output of the command to only those entries that contain the pattern. Use of wildcards and other common regular expression operators is not supported. Some configuration settings do not display when filtered. When in doubt, use the command without the -pattern operand. -all -fid FID Displays all configuration data including chassis and switch configuration. Displays configuration data for a logical switch specified by its fabric ID. This option is valid only in a Virtual Fabric environment and requires chassis permissions -chassis -local [file] Displays configuration data for the chassis only. This option is valid only in a Virtual Fabric environment and requires chassis permissions Displays the content of a configuration file that was previously created by configUpload and stored on the chassis. The output can be optionally filtered by -pattern "pattern". If file is omitted, the command prompts for a file name. The output format when -local is specified matches that of configUpload and contains a superset of the information provided when -local is not specified. Fabric OS Command Reference 97 53-1001186-01