HP 8/24 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Apri - Page 691
portTestShow, Type of ports asked to test ALL_PORTS, ALL_E_PORTS
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 691 highlights
portTestShow 2 portTestShow Synopsis Displays information from portTest. porttestshow [-ports itemlist] Description Use this command to display a snapshot of information from portTest. The following information displays: • Pass or fail information on a given port. • Port type tested. • Current state of portTest (NO TEST, TESTING, or TEST DONE). • Type of ports asked to test (ALL_PORTS, ALL_E_PORTS, ALL_L_PORTS, ALL_F_PORTS, ALL_LB_PORTS, or SINGLE_PORT). • Pattern used in testing. • Seed used in testing. • User delay value. • Total iteration asked to test. • Current test iteration. • Total fails on this test. • Consecutive fails on this test. • portTest start time. • portTest stop time. • Timeout value. • Error code, if any. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operand: -ports itemlist Specify a list of user ports to test. By default, all user ports in the current slot is assumed. Refer to the itemList help page for further details. Examples To display information from portTest: switch:admin> porttestshow 1 Port 1 : PASS PortType: OTHER PortInternalState: INIT Pattern: 0x0 Seed: 0x0 TotalIteration: 0 TotalFail: 0 StartTime: NONE StopTime: NONE Timeout: 0 PortState: NO TEST PortTypeToTest: NO_TEST UserDelay: 0 CurrentIteration: 0 ConsecutiveFail: 0 ErrorCode: 0 See Also portLoopbackTest, portTest, spinFab, stopPortTest Fabric OS Command Reference 663 53-1001186-01