HP AM866A Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 20 - Page 382
NS-1004, Recommended, Action, firmwareDownload, Severity, Message, Probable Cause, haFailover
UPC - 884420064602
View all HP AM866A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 382 highlights
53 NS-1004 Recommended Action To avoid disruption of traffic in the event of an unplanned failover, schedule a firmwareDownload so that the active and standby CPs have the same firmware version. Reduce the local device count to follow the capability of the lowest version of firmware. Severity INFO NS-1004 Message , [NS-1004], ,, INFO, , Number of local devices , exceeds the standby can support , can't sync. Probable Cause Indicates that the name server on the standby CP has lower supported capability than the active CP due to different firmware versions running on the active and standby CPs. This means that the active and standby CPs are out of sync. Any execution of the haFailover or firmwareDownload commands will be disruptive. Recommended Action To avoid disruption of traffic in the event of an unplanned failover, schedule a firmwareDownload so that the active and standby CPs have the same firmware version. Reduce the local device count to follow the capability of the lowest version of firmware. Severity INFO NS-1005 Message , [NS-1005], ,, WARNING, , Zone size of has over the supporting limit of for the remote switch domain ID . Probable Cause Indicates that the effective zone size has exceeded the limit that a remote switch can support. The oversized portion will be truncated. Recommended Reduce the zone size to 1024 or lesser, or upgrade the software of the remote switch to support Action 2048 zones. Severity WARNING NS-1006 Message , [NS-1006], ,, WARNING, , Duplicated WWN was detected with PID and . Probable Cause Indicates that an existing device has the same WWN as a new device that has come online. Recommended Action The switch will process the new PID and leave the existing PID intact. Subsequent switch operations will clean up the obsolete PID, however, administrators could check and remove devices with duplicated WWN. Severity WARNING 330 Fabric OS Message Reference 53-1000600-02