HP AM866A Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, Apr - Page 263
FICU System Messages, FICU-1001
UPC - 884420064602
View all HP AM866A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
Chapter FICU System Messages 29 FICU-1001 Message , [FICU-1001], ,, ERROR, , : config failed rc = . Probable Cause Indicates that one of the configuration management functions failed. The key variable is part of the Fabric OS configuration database and is for support use only. The error variable is an internal error number. Recommended Action Execute an haFailover command on the switch if it has redundant control processors (CPs) or reboot the switch. Run the supportSave command to check if your flash is full. If the flash is full, run the supportSave command to clear the core files. Refer to the Fabric OS Command Reference Manual for more information on these commands. Severity ERROR FICU-1002 Message , [FICU-1002], ,, ERROR, , : Failed to get RNID from Management Server: Domain=, rc=. Probable Cause Indicates that the fibre connectivity control unit port (FICON-CUP) daemon failed to get the switch request node ID (RNID) from the management server because of a Fabric OS problem. The domain variable displays the domain ID of the target switch for this RNID. The error variable is an internal error number. Recommended Action If this is a bladed switch, execute the haFailover command. If the problem persists, or if this is a nonbladed switch, download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference for more information on these commands. Severity ERROR FICU-1003 Message , [FICU-1003], ,, WARNING, , : FICON-CUP License Not Installed: (). Probable Cause Indicates that the fibre connectivity control unit port (FICON-CUP) license is not installed on the switch. Recommended Action Run the licenseShow command to check the installed licenses on the switch. The switch cannot be managed using FICON-CUP commands until the FICON-CUP license is installed. Contact your switch supplier for a FICON-CUP license. Run the licenseAdd command to add the license to your switch. Fabric OS Message Reference 205 53-1001157-01