HP AM866A Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, Apr - Page 570
TRCE-1004, Recommended, Action, supportFtp, supportSave, Severity, Message, Probable Cause
UPC - 884420064602
View all HP AM866A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 570 highlights
85 TRCE-1004 Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR TRCE-1004 Message , [TRCE-1004], ,, WARNING, , Trace dump< optional slot indicating on which slot the dump occurs > was not transferred because trace auto-FTP disabled. Probable Cause Indicates that trace dump files have been created on the switch or the indicated slot but are not automatically transferred from the switch because auto-FTP is disabled. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity WARNING TRCE-1005 Message , [TRCE-1005], ,, ERROR, , FTP Connectivity Test failed due to error. Probable Cause Indicates that the connectivity test to the FTP host fails, because of an FTP error such as a wrong FTP address, an FTP site down, or the network being down. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR TRCE-1006 Message , [TRCE-1006], ,, INFO, , FTP Connectivity Test succeeded to FTP site ' '. Probable Cause Indicates that a connectivity test to the FTP host has succeeded. This feature is enabled by the supportFtp -t command. Recommended No action is required. Action Severity INFO 512 Fabric OS Message Reference 53-1001157-01