HP BL480c HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 95
Set Ntp Primary, Set Ntp Secondary, Set Snmp Contact
UPC - 882780759664
View all HP BL480c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
• Access level/Bay level: OA administrator, OA operator • Restrictions: Poll time should be between 60 and 86,400 seconds. SET NTP PRIMARY • Command: SET NTP PRIMARY • Description: Sets the primary server used for synchronizing time and date using the NTP. The value can be an IPv4 address, an IPv6 address, or a DNS name. • Access level/Bay level: OA administrator, OA operator • Restrictions: IPv6 addresses cannot specify the network prefix length. SET NTP SECONDARY • Command: SET NTP SECONDARY • Description: Sets the secondary server used for synchronizing time and date using the NTP. The value can be either an IPv4 address, an IPv6 address, or a DNS name. • Access level/Bay level: OA administrator, OA operator • Restrictions: IPv6 addresses cannot specify the network prefix length. SET SNMP CONTACT • Command: SET SNMP CONTACT "" • Description: Configures the name of the system contact. The default contact is blank. • Access level/Bay level: OA administrator, OA operator • Restrictions: The must be no more than 20 characters long. Valid characters are all alphanumeric, the underscore (_), the dash (-), and spaces. Enclosure network configuration commands 95