HP BL860c U320 Installation Guide - Page 28
Updating the Adapter Firmware, Example 5-4 Selecting a Controller for Firmware Update
View all HP BL860c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Example 5-4 Selecting a Controller for Firmware Update Available SCSI Ultra320 Controllers Flash SCSI EFI Slot Seg Bus Dev Part Firmware Driver XX 00 20 01 No 1.03.06.00 1.02.09.00 SCSI Ultra320 Core-IO 01 00 80 01 Yes 1.03.35.65 1.04.02.00 SCSI Ultra320 Dual-Channel PCI-X Adapter Select All Back The Flash Part column indicates whether the EFI utility can update the firmware of a SCSI controller. A value of No in this column indicates the EFI utility cannot be used to update firmware for that controller. In Example 5-4, the first SCSI controller listed is a Core-IO controller, as indicated by its description and the value of XX in the Slot column. You cannot use the EFI utility to update the firmware for Core-IO SCSI controllers. The EFI utility can only perform firmware updates on SCSI controllers that are attached to host bus adapters installed in PCI slots. The SCSI Firmware and EFI Driver columns display the versions of the SCSI firmware and EFI driver that are currently running on the controller. To update the SCSI firmware or EFI driver on an A7173A adapter, use the arrow keys to highlight the SCSI controller attached to the A7173A adapter that you want to update, then press Enter. The EFI utility will display a directory listing from which you can select the firmware image file, such as in Example 5-5: Example 5-5 Selecting a Firmware Image to Download Select Firmware Image .. it_1030.fw 1 Ultra320 SCSI Firmware 1.03.35.65 lsimpt.rom 2 Ultra320 EFI Driver 1.04.02.00 Back 1 An adapter firmware file 2 An EFI driver file Updating the Adapter Firmware If you select an Ultra320 SCSI Firmware file (such as it_1030.fw in Example 5-5), then press Enter, a confirmation screen appears. For example You are about to install SCSI Firmware version 1.03.35.65 Do you want to proceed? (y/n) If you press y, a status screen appears, displaying the progress of the operation. For example: Installing SCSI Firmware Image for Seg:00 Bus:80 Dev:01 Percentage Complete - 100% Re-initializing controller... This operation may take up to one minute. Firmware Image Installation successful for Seg:00 Bus:80 Dev:01 Updated Seg:00 Bus:80 Dev:01 to SCSI Firmware Version 1.03.35.65 Press any key to continue Press any key to return to the main menu. 28 Hardware Installation and OS-Independent Procedures