HP BladeSystem bc2000 Setup and Installation Guide HP BladeSystem bc2000 and b - Page 86
Command Line Interface, Remote Console, Virtual Buttons, Power On, Reboot, Apply
View all HP BladeSystem bc2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
4. Click Remote Console. The Remote Console screen appears. 5. Click Remote Console. A new window opens that enables you to connect to the blade PC terminal interface. 6. If the blade PC is running the operating system: a. Return to the Web-based user interface and click Virtual Buttons in the left panel. CAUTION: Without the blade PC health driver, the Integrated Administrator cannot reboot a blade PC. b. If the blade PC is off, select Power On at the bottom of the screen; otherwise, select Reboot at the bottom of the screen. c. Click Apply and return to the remote console session. 7. When prompted to press F10 for the Computer Setup (F10) Utility, press Esc then 0. 8. To exit Computer Setup from the file menu: a. Select one of the following: ◦ Apply Defaults and Exit ◦ Ignore Changes and Exit ◦ Save Changes and Exit b. To close the remote console session: 9. When prompted to press F10, press Esc then 0 (zero) to confirm. a. Press Ctrl_ (control underscore). b. Press D. Command Line Interface To access the Computer Setup (F10) Utility of a blade PC using the command line interface: 1. If the blade PC is running the operating system, reboot the blade PC by typing the following commands sequentially: REBOOT BAY Yes 2. Connect to the blade PC by observing its bay number and typing: CONNECT BAY 3. When prompted to press F10 for the Computer Setup (F10) Utility, press Esc then 0. 78 Appendix D Troubleshooting ENWW