HP BladeSystem bc2000 Setup and Installation Guide HP BladeSystem bc2000 and b - Page 87
Reviewing Activity of a Blade PC, Web-Based Interface, Command Line Interface, Powering Off
View all HP BladeSystem bc2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
4. To exit the Computer Setup (F10) Utility: a. Press Esc. b. When prompted to press F10, press Esc then 0 (zero) to confirm. 5. To close the remote console session: a. Press Ctrl_ (control underscore). b. Press D. Reviewing Activity of a Blade PC NOTE: This task can only be performed for a given blade PC bay by enclosure administrators, group administrators, and group members with access rights to the blade PC bay. Web-Based Interface To access the console log for a blade PC using the Web-based user interface: 1. Click the Bays tab. 2. Click Bay List in the left panel. 3. Select the bay from the bay list. 4. Click Console Log under Bay Information. Command Line Interface To view the system log for a blade PC using the command line interface, type: SHOW SYSLOG BAY NOTE: Pressing the letter q quits the command. Pressing any other key shows the next screen, if more information is available to display. The system log of the blade PC is not stored between reboots, so the information only includes what has taken place since the last power-on of the Integrated Administrator. Powering Off the Blade PC CAUTION: Rebooting or powering off the blade PC removes all power with the exception of Auxiliary power from the blade PC and ends all open sessions. Web-Based Interface To reboot or power off the blade PC using the Web-based user interface: 1. Click the Bays tab. 2. Click Bay List in the left panel. 3. Click the blade PC you wish to reboot or power off. 4. Click Virtual Buttons at the bottom of the screen. ENWW Remote Troubleshooting 79