HP BladeSystem bc2000 Cisco Network Access Control for HP Thin Clients and CCI - Page 19
All network interface cards, Hosts, IP Addresses, switch port and CAM/CAS server addresses
![]() |
View all HP BladeSystem bc2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
8. Select a specific network interface card or the default, All network interface cards. 9. On the Hosts tab, select IP Addresses and then type the IP address of the 3960 internal switch port and CAM/CAS server addresses (10.6.6.2, 10.3.3.3, and 10.4.4.4, respectively). 19
![](/manual_guide/products/hewlettpackard-bladesystem-bc2000-cisco-network-access-control-hp-clients-cci-5fda6ca/19.png)
19
8.
Select a specific network interface card or the default,
All network interface cards
.
9.
On the
Hosts
tab, select
IP Addresses
and then type the IP address of the 3960 internal
switch port and CAM/CAS server addresses (
10.6.6.2
,
10.3.3.3
, and
10.4.4.4
,
respectively).