HP BladeSystem bc2000 Cisco Network Access Control for HP Thin Clients and CCI - Page 21
Apply Rule to Network Interface, Hosts, IP Addresses, port and CAM/CAS server addresses in the field
![]() |
View all HP BladeSystem bc2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
17. In the Apply Rule to Network Interface field, ensure that the proper network interface card is selected. 18. On the Hosts tab, select IP Addresses and type the IP address of the 3960 internal switch port and CAM/CAS server addresses in the field (10.6.6.2, 10.3.3.3, and 10.4.4.4, respectively). 21
![](/manual_guide/products/hewlettpackard-bladesystem-bc2000-cisco-network-access-control-hp-clients-cci-5fda6ca/21.png)
21
17.
In the
Apply Rule to Network Interface
field, ensure that the proper network interface
card is selected.
18.
On the
Hosts
tab, select
IP Addresses
and type the IP address of the 3960 internal switch
port and CAM/CAS server addresses in the field (
10.6.6.2
,
10.3.3.3
, and
10.4.4.4
,
respectively).