HP BladeSystem bc2200 Command Line Interface Reference Guide HP BladeSystem PC - Page 140
port storm-control broadcast rate
![]() |
View all HP BladeSystem bc2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Ethernet Configuration Commands port storm-control broadcast rate The port storm-control broadcast rate Interface Configuration (Ethernet) mode command configures the maximum broadcast rate. To return to the default configuration, use the no form of this command. Syntax port storm-control broadcast rate rate no port storm-control broadcast rate Parameters n rate - Maximum kilobits per second of broadcast and multicast traffic on a port. (Range: 70-100000). Default Setting The default storm control broadcast rate is 3500 Kbits/Sec. Command Mode Interface Configuration (Ethernet) mode Command Usage Use the port storm-control broadcast enable Interface Configuration mode command to enable broadcast storm control. Example The following command configures the maximum storm control broadcast rate at 900 Kbits/Sec on Ethernet port e42 of a device. Console(config)# interface ethernet e42 Console(config-if)# port storm-control broadcast rate 900 8-22 www.hp.com HP PC Blade Switch CLI Reference Guide
![](/manual_guide/products/hewlettpackard-bladesystem-bc2000-command-line-interface-reference-guide-hp-bladesystem-pc-blade-switch-07763e1/140.png)