HP BladeSystem bc2200 Command Line Interface Reference Guide HP BladeSystem PC - Page 31
dot1x timeout server-timeout, and the result of multiplying
View all HP BladeSystem bc2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
802.1x Commands dot1x timeout server-timeout The dot1x timeout server-timeout Interface Configuration mode command sets the time that the device waits for a response from the authentication server. To return to the default configuration, use the no form of this command. Syntax dot1x timeout server-timeout seconds no dot1x timeout server-timeout Parameters n seconds - Time in seconds that the device waits for a response from the authentication server. (Range: 1-65535 seconds) Default Configuration The timeout period is 30 seconds. Command Mode Interface configuration (Ethernet) mode Command Usage The actual timeout can be determined by comparing the dot1x timeout server-timeout value and the result of multiplying the radius-server retransmit value with the radius-server timeout value and selecting the lower of the two values. Example The following command sets the time for the retransmission of packets to the authentication server to 3600 seconds. Console(config-if)# dot1x timeout server-timeout 3600 HP PC Blade Switch CLI Reference Guide www.hp.com 2-11